Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production.

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 µmol h-1, surpassing both low crystallinity (8.24 µmol h-1) and high crystallinity MoSe2 (3.86 µmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

S­scheme heterojunction of thin-layer O-modified graphitic carbon nitride/cobalt porphyrin to promote photocatalytic CO2 conversion.

The emissions of CO2 are increasing year by year, which have led to serious environmental problems. Converting CO2 into valuable fuels through photocatalysis is a promising strategy. In this research, oxygen atoms were successfully innovated into graphitic carbon nitride (CN). Additionally, cobalt porphyrin (CoTPP) was successfully loaded onto the modified carbon nitride (Co/CN). The generation of interfacial electric fields and bending bands between CN and CoTPP was demonstrated experimentally. The electrons in the CN and the holes in the CoTPP were combined to form a unique S-scheme heterojunction structure, and efficient separation of carriers was promoted. As a result, the CO conversion under visible light irradiation reached an impressive 100.70 µmol g-1 h-1. By integrating theoretical and experimental findings, this study underscores the critical role of catalyst design in enabling efficient photocatalytic CO2 reduction.

Synthesis Design and Properties of Ca5(BO3)3F: Bi3+/Eu3+: Insight into Luminescence, Temperature, and Pressure Sensing.

Nowadays, the utilization of noncontact temperature and pressure sensing is experiencing growing popularity. In this work, Bi3+, Eu3+-doped Ca5(BO3)3F (CBOF) phosphors were synthesized via an ionic liquid-assisted electrospinning approach. The effect of molecular weight of polyvinylpyrrolidone on the morphology of CBOF was investigated, and a comprehensive analysis of its formation mechanism was presented. The luminescence properties of CBOF: Bi3+, Eu3+ were studied systematically. The temperature-dependent emission of CBOF: Bi3+, Eu3+ phosphor was discussed, and it displayed thermal sensitivity, which can be attributed to the distinct thermal response emission behaviors of Bi3+ and Eu3+. The investigation of the pressure-dependent emission behavior of the CBOF: Bi3+ phosphor revealed an anomalous phenomenon: with the increase of pressure, the emission peak showed a trend of first a blue shift and then a red shift. This anomaly was discussed in detail. The phosphor exhibits visual color change (blue to cyan), remarkable pressure sensitivity (4.76 nm/GPa), and a high upper pressure limit (24.2 GPa), indicating its potential use as an optical pressure sensor. Consequently, this study presents an innovative synthetic approach for fabricating CBOF, presenting a bifunctional material with promising prospects in the fields of temperature and pressure sensing.

Co single atom coupled oxygen vacancy on W18O49 nanowires surface to construct asymmetric active site enhanced peroxymonosulfate activation.

Enhancing the activation of peroxymonosulfate (PMS) is essential for generating more reactive oxygen species in advanced oxidation process (AOPs). Nevertheless, improving PMS adsorption and expediting interfacial electron transfer to enhance reaction kinetics pose significant challenges. Herein, we construct confined W18O49 nanowires with asymmetric active centers containing Co-Vo-W (Vo: oxygen vacancy). The design incorporates surface-rich Vo and single-atom Co, and the resulting material is employed for PMS activation in water purification. By coupling unsaturated coordinated electrons in Vo with low-valence Co single atoms to construct an the "electron fountainhead", the adsorption and activation of PMS are enhanced. This results in the generation of more active free radicals (SO4•-, •OH, •O2-) and non-free radicals (1O2) for the decomposition of micropollutants. Thereinto, the degradation rate of bisphenol A (BPA) by Co-W18O49 is 32.6 times faster that of W18O49 monomer, which is also much higher than those of other transition-metal-doped W18O49 composites. This work is expected to help to elucidate the rational design and efficient PMS activation of catalysts with asymmetric active centers.

Ba3Lu(BO3)3:Ce3+,Tb3+/Mn2+: Dual-Functional Material for WLEDs and Optical Pressure Sensing.

Ba3Lu(BO3)3(BLB):Ce3+,Tb3+/Mn2+ phosphors were designed to explore effective and multifunctional applications. Under the excitation of near-ultraviolet (n-UV) light, the BLB:Ce3+ phosphor showed broad-band blue emission. After codoping with Mn2+ ions, the single-phase white light phosphor is achieved through the energy transfer (ET) between Ce3+ and Mn2+. In addition, thermal stability is significantly enhanced by the addition of Tb3+ (BLB:0.02Ce3+,0.20Tb3+) compared to that codoped with Mn2+ (BLB:0.02Ce3+,0.10Mn2+). The light-emitting diode (LED) device with warm white light emission is fabricated with UV-chip-coated BLB:0.02Ce3+,0.05Tb3+ and Sr2Si5N8:Eu2+ phosphors, showing a good potential application value for LEDs. Additionally, the spectral properties of borate-based phosphors (BLB:0.02Ce3+) under high pressure were studied for the first time. Surprisingly, the change of pressure enabled the emission peak of BLB:0.02Ce3+ to be tuned from 485 to 552 nm, and dλ/dP is 3.51 nm GPa-1. The color changes from blue to yellow with an increase of pressure. Compared with the reported data, the pressure-sensing sensitivity based on the central peak shift in this work is the highest in all Ce3+ single-doped samples. In addition, the emitting color and intensity were gradually regained after decompression. The intensity can reach 80% of the initial intensity. All data demonstrate that the BLB:0.02Ce3+ phosphor has the potential to be utilized as an optical pressure sensor due to the high-pressure sensitivity and visible color tuning.

Pressure-Triggered Fluorescence Intensity Ratio Variations of YNbO4:Bi3+/Ln3+ (Ln = Eu or Sm) for High-Sensitivity Optical Pressure Sensing.

Optical pressure sensing by phosphors is a growing area of research. However, the main pressure measurement methods rely on the movement of the central peak position, which has significant drawbacks for practical applications. This paper demonstrates the feasibility of using the fluorescence intensity ratio (FIR) of different emission peaks for pressure sensing. The FIR (IBi3+/ILn3+) values of the synthesized YNbO4:Bi3+/Ln3+ (Ln = Eu or Sm) phosphors are all first-order exponentially related to pressure, and YNbO4:Bi3+/Ln3+ (Ln = Eu or Sm) phosphors have high pressure-sensing sensitivities (Sp and Spr), which are 6 times higher than those from our previously reported work. In addition, the changes in FIR values during the decompression process were also calculated, and the trend was similar to that during the compression process. The YNbO4:Bi3+,Eu3+ phosphor has better pressure recovery performance. In summary, the YNbO4:Bi3+/Ln3+ (Ln = Eu or Sm) phosphors reported in this paper are expected to be applied in the field of optical pressure sensing, and this study provides a new approach and perspective for designing new phosphors for pressure measurement.

Identification a novel Ganoderma FIP gene from Ganoderma capense and its functional expression in Pichia pastoris.

Ganoderma capense is a precious medicinal fungus in China. In this study, a novel fungal immunomodulatory protein gene, named as FIP-gca, was cloned from G. capense by homologous cloning. Sequencing analysis indicated that FIP-gca was composed of 336 bp, which encoded a polypeptide of 110 amino acids. Protein sequence blasting and phylogenetic analysis showed that FIP-gca shared homology with other Ganoderma FIPs. FIP-gca was effectively expressed in Pichia pastoris GS115 at an expression level of 166.8 mg/L and purified using HisTrap™ fast-flow prepack columns. The immunomodulation capacity of rFIP-gca was demonstrated by that rFIP-gca could obviously stimulate cell proliferation and increase IL-2 secretion of murine spleen lymphocytes. Besides, antitumor activity of rFIP-gca towards human stomach cancer AGS cell line was evaluated in vitro. Cell wound scratch assay proved that rFIP-gca could inhibit migration of AGS cells. And flow cytometry assay revealed that rFIP-gca could significantly induce apoptosis of AGS cells. rFIP-gca was able to induce 18.12% and 22.29% cell apoptosis at 0.3 µM and 0.6 µM, respectively. Conclusively, the novel FIP-gca gene from G. capense has been functionally expressed in Pichia and rFIP-gca exhibited ideal immunomodulation and anti-tumour activities, which implies its potential application and study in future.

Construction of a Brain-specific SLC23A2 Gene Knockout Mice Model.

Vitamin C (VC) is a key antioxidant of the Central Nervous System (CNS) and SLC23A2 (SVCT2) is the only transporter that actively transports VC into the brain. While the existing animal models of VC deficiency are in the whole body, the essential role of VC in brain development remains elusive. In our study presented here, the CRISPR/Cas9 technology was applied for the construction of a C57BL/6J-SLC23A2 em1(flox)Smoc mouse model, which was crossed with the Glial fibrillary acidic protein-driven Cre Recombinase (GFAP-Cre) genotype mice to generate a conditional knockout model of SLC23A2(SVCT2) gene in mice brain (GFAP-Cre;SLC23A2 flox/flox) after generations of crossbreeding. Our results showed that the expression of SVCT2 in GFAP-Cre;SLC23A2 flox/flox (Cre;svct2 f/f) mice brain was significantly decreased, and consistently, the expression of Neuronal nuclei antigen (NeuN), Glial fibrillary acidic protein (GFAP), calbindin-28k, brain-derived neurotrophic factor (BDNF) was down-regulated but Ionized calcium binding adapter molecule 1 (Iba-1) was up-regulated in Cre;svct2 f/f mice brain tissues. On the other hand, the levels of Glutathione, Reduced (GSH), myeloperoxidase (MDA), 8-isoprostane, tumor necrosis factor-α (TNF-α) and interleukin-6(IL-6) were significantly increased, but the levels of VC in brain tissue of the model group were decreased in Cre;svct2 f/f mice brain tissues, indicating the protective effect of VC against oxidative stress and inflammation during pregnancy. Thus, the conditional knockout of the SLC23A2 gene in the brain of mouse was successfully established by the CRISPR/Cas9 technology in our study, providing an effective animal model for studying the role of VC in fetal brain development.

Attenuated Cytokine-Induced Memory-Like Natural Killer Cell Responses to Mycobacterium tuberculosis in Tuberculosis Patients.

Purpose: This study aimed to investigate the phenotype, proliferation and functional alterations of cytokine-induced memory-like natural killer (CIML NK) cells from healthy subjects and TB patients, and assessed the efficacy of CIML NK cells in response to H37Rv-infected U937 cells in vitro. Methods: Fresh peripheral blood mononuclear cells (PBMCs) were isolated from healthy people and tuberculosis patients and activated for 16h using low-dose IL-15, or IL-12, IL-15, IL-18 combination or IL-12, IL-15, IL-18 and MTB H37Rv lysates, respectively, followed by low-dose IL-15 maintenance for another 7 days. Then, the PBMCs were co-cultured with K562 and H37Rv-infected U937, and the purified NK cells were co-cultured with H37Rv infected U937. The phenotype, proliferation and response function of CIML NK cells were assessed using flow cytometry. Finally, colony forming units were enumerated to confirm the survival of intracellular MTB. Results: CIML NK phenotypes from TB patients were similar to healthy controls. CIML NK cells undergo higher rates of proliferation after IL-12/15/18 pre-activation. Moreover, the poor expansion potential of CIML NK cells co-stimulated with MTB lysates. CIML NK cells from healthy individuals showed enhanced IFN-γ functional to H37Rv infected U937 cells, along with significantly enhanced killing of H37Rv. However, the CIML NK cells from TB patients show attenuated IFN-γ production and now enhanced the ability of killing intracellular MTB compared to those from healthy donors after co-cultured with H37Rv infected U937. Conclusion: CIML NK cells from healthy individuals exist the increased ability of IFN-γ secretion and boosted anti-MTB activity in vitro, which from TB patients show impaired IFN-γ production and no enhanced anti-MTB activity compared to those from healthy donors. Additionally, we observe the poor expansion potential of CIML NK cells co-stimulated with antigens from MTB. These results open up new possibilities for NK cell-based anti-tuberculosis immunotherapeutic strategies.

Eu2+-Doped Ca4Y3Si7O15N5 Phosphor with High Thermal Stability and Pressure Sensitivity for Dual-Functional Applications in W-LEDs and Pressure Sensors.

A novel green-light-emitting silicon-based oxynitride phosphor Ca4Y3Si7O15N5:Eu2+ with low thermal quenching and ideal pressure sensitivity is reported. The Ca3.99Y3Si7O15N5:0.01Eu2+ phosphor can be efficiently excited by 345 nm ultraviolet light and shows very low thermal quenching (integrated and peak emission intensities at 373 and 423 K were 96.17, 95.86, and 92.73, 90.66% of those at 298 K, respectively). The correlation between high thermal stability and structural rigidity is investigated in detail. The white-light-emitting diode (W-LED) is assembled by depositing the obtained green-light-emitting phosphor Ca3.99Y3Si7O15N5:0.01Eu2+ and commercial phosphors on a ultraviolet (UV)-emitting chip (λ = 365 nm). The CIE color coordinates, color rendering index (Ra), and corrected color temperature (CCT) of the obtained W-LED are (0.3724, 0.4156), 92.9, and 4806 K, respectively. In addition, when subjected to in situ high-pressure fluorescence spectroscopy, the phosphor exhibits an evident red shift of 40 nm with an increase in pressure from 0.2 to 32.1 GPa. The phosphor has the advantage of high-pressure sensitivity (dλ/dP = 1.13 nm GPa-1) and visualization with pressure changes. The possible reasons and mechanisms are deeply discussed in detail. Based on the above advantages, Ca3.99Y3Si7O15N5:0.01Eu2+ phosphor is expected to have potential applications in W-LEDs and optical pressure sensing.

Accuracy of the InnowaveDX MTB/RIF test for detection of Mycobacterium tuberculosis and rifampicin resistance: a prospective multicentre study.

Early and accurate diagnosis of tuberculosis (TB) is necessary to initiate proper therapy for the benefit of the patients and to prevent disease transmission in the community. In this study, we developed the InnowaveDX MTB/RIF (InnowaveDX) to detect Mycobacterium tuberculosis (MTB) and rifampicin resistance simultaneously. A prospective multicentre study was conducted to evaluate the diagnostic performance of InnowaveDX for the detection MTB in sputum samples as compared with Xpert and culture. The calculated limit of detection (LOD) for InnowaveDX was 9.6 CFU/ml for TB detection and 374.9 CFU/ml for RIF susceptibility. None of the other bacteria tested produced signals that fulfilled the positive TB criteria, demonstrating a species-specificity of InnowaveDX. Then 951 individuals were enrolled at 7 hospitals, of which 607 were definite TB cases with positive culture and/or Xpert results, including 354 smear-positive and 253 smear-negative cases. InnowaveDX sensitivity was 92.7% versus bacteriologically TB standard. Further follow-up revealed that 61 (91.0%) out of 67 false-positive patients with no bacteriological evidence met the criteria of clinically diagnosed TB. Among 125 RIF-resistant TB patients diagnosed by Xpert, 108 cases were correctly identified by InnowaveDX, yielding a sensitivity of 86.4%. Additionally, the proportion of very low bacterial load in the discordant susceptibility group was significantly higher than in the concordant susceptibility group (P = 0.029). To conclude, we have developed a novel molecular diagnostic with promising detection capabilities of TB and RIF susceptibility. In addition, the discordant RIF susceptibility results between InnowaveDX and Xpert are more frequently observed in samples with very low bacterial load.

Health effects of subchronic intake of high-dose Dendrobium officinale in rats / 预防医学

Objective@#To assess the effects of subchronic intake of high-dose Dendrobium officinale on body weight, food intake, food utilization, and blood biochemical parameters in rats, so as to provide insights into assessment of edible safety of D. officinale.@*Methods@#Eighty SPF-grade SD rats were randomly divided into the low-, medium- and high-dose groups and the control group, of 10 male and 10 female rats in each group. Rats in the low-, medium- and high-dose groups were administered with D. officinale feeds at doses of 2.0, 4.0, and 8.0 g/kg body weight, respectively, while animals in the control group were given basic diet for successive 13 weeks. The rat body weight, food intake, food utilization, and blood biochemical parameters were compared between groups.@*Results@#Normal diet and activity was seen in all rats, and no abnormal syndromes, signs or deaths were found during the study. There were no significant differences in rat body weight, food intake, total weight gain, total food intake, alanine aminotransferase, aspartate aminotransferase, urea nitrogen, creatinine, triacylglycerol, cholesterol, total protein, albumin, albumin/globulin ratio or blood glucose among four groups (P>0.05). The food utilization 7 weeks post-administration [(8.71%±0.78%) vs. (10.54%±1.37%), P<0.05] and the total food utilization [(18.00%±0.41%) vs. (19.51%±1.21%), P<0.05] were significantly lower in male rats in the high-dose group than in the control group.@*Conclusion@#Subchronic intake of high-dose D. officinale shows no toxicity in rats, and reduced food utilization may be associated with the health function of D. officinale in male rats.

CoMo layered double hydroxide equipped with carbon nanotubes for electrocatalytic oxygen evolution reaction.

To carry out effective resource reforming of sustainable electricity, hydrogen production by electrochemical water splitting provides an eco-friendly and economical way. Nevertheless, the oxygen evolution reaction (OER) at the anode is limited by the slow reaction process, which hinders the large-scale development and application of electrolysis technology. In this work, we present an electrocatalyst with superior OER performance, which attributed to the abundant active sites and good electronic conductivity. The two-dimensional CoMo Layered Double Hydroxide nanosheets are synthesized and deposited on conductive carbon nanotubes (CoMo LDH/CNTs), and then hybrid composites show better catalytic performance than their undecorated counterpart under identical conditions. Specifically, CoMo LDH/CNTs exhibit the low overpotential of 268 mV to obtain 10 mA cm-2and satisfactory stability (more than 40 h). We emphasize that this hybridization strategy with a conductive supporting framework could design more abundant and low-cost OER electrocatalysts to minimize electrical energy consumption, thereby achieving efficient conversion between energy sources.

Experimental pathogenicity and comparative genome analysis of high- and low-virulence strains of rabbit-origin Pasteurella multocida.

Pasteurella multocida, the causative pathogen of rabbit pasteurellosis, causes significant economic losses in the commercial rabbit industry. However, the associated pathogenic mechanism of P. multocida remains unclear. The aim of this study is to compare the genomes and pathogenicity of high- and low-virulence strains of P. multocida to advance the current understanding of rabbit pasteurellosis. The high-virulence strain rapidly proliferates in the lung and spleen of infected mice within approximately 9 h, maintaining a high bacterial load until host death. Meanwhile, the low-virulence strain only proliferates in mouse organs for a short time, with the bacterial load beginning to decrease 13 h post-infection. Moreover, the expressions of inflammatory cytokines MCP-1, TNF-α, and IL-1ß are upregulated in all infected mouse lung and spleen tissue, however, the high-virulence strain induced significantly higher expression than the low-virulence strain. Histopathological analysis revealed greater inflammation and tissue lesions in the lung and spleen of mice infected with the high-virulence strain. Two pathogenicity-associated regions unique to the genome of the high-virulence strain harbor approximately 199 genes, including functional genes related to virulence factors, such as lipopolysaccharide biosynthesis, iron acquisition, biosynthesis of outer membrane proteins, and adhesion. These two genomic regions are shared by three previously sequenced, highly virulent P. multocida strains in rabbits. In conclusion, the increased pathogenicity of high-virulence P. multocida may be due to the presence of virulence-associated genes in two unique genomic regions, resulting in strong proliferative activity, significant inflammation, and pathological lesions in the mouse model. These findings provide important insights regarding the pathogenic mechanism underlying rabbit pasteurellosis.

Multifunctional CaF2: Yb3+, Ho3+, Gd3+ Nanocrystals: Insight into Crystal Growth and Properties of Upconversion Luminescence, Magnetic, and Temperature Sensing Properties.

The upconversion (UC) emission intensity of Ln3+-doped CaF2 nanomaterials is not ideal, which limits their application in some advanced scientific fields. Hence, it is extremely imperative to enhance the emission intensity of UC nanocrystals. In this work, an ionic-liquid-assisted hydrothermal method based on an ethylene glycol (EG) and ionic liquid (IL) two-phase system was used to synthesize CaF2 doped with Yb3+ and Ho3+. The influence of the amount of IL and the reaction time as well as the concentration of Gd3+ doping on morphology and size was studied in detail, and the growth mechanism was proposed. Green UC luminescence materials were obtained through co-doping Yb3+ and Ho3+ ions. Furthermore, the luminescence of UC was increased monotonically with the introduction of Gd3+ ions. The effect mechanism of Gd3+ doping on the UC luminescence was put forward, which might provide a new method for the promotion of UC luminescence. In addition, the temperature sensing of CaF2: Yb3+/Ho3+/Gd3+ was investigated, which demonstrated that the phosphor has a potential application prospect in thermal sensing. Meanwhile, CaF2: Yb3+/Ho3+/Gd3+ also exhibited a paramagnetic property at room temperature. Therefore, these multifunctional nanocrystals may have prospective applications in optical bioimaging, magnetic resonance imaging, and temperature sensing.

A Triple-Doped Phosphor Strategy for the Conversion of Cool and Warm White Light.

This work proposes a new type of Eu2+, Ce3+, Mn2+ codoped strategy that can be adapted to both ultraviolet (UV) and blue chips to achieve high-quality white light illumination. Primarily, the target sample was confirmed by X-ray diffraction (XRD) and Rietveld refinement, and the surface morphology and element distribution were observed by scanning electron microscopy (SEM). Second, the energy transfer behavior and mechanism were determined by studying double-doped samples. Lu2Mg2Al2Si2O12: Eu2+,Ce3+ (LMAS: Eu2+,Ce3+) can realize an emission color adjustment from blue to yellow. The emission color of LMAS: Ce3+,Mn2+ can be adjusted from light yellow to orange yellow. Afterward, the triple-doped sample exhibits full-spectrum emission under the excitation at 365 nm, and yellow emission under the excitation at 450 nm. When combined with a 365 nm chip, the obtained light-emitting diode (LED) devices can achieve warm white light with a color rendering index (Ra) of 96.6, light emission (LE) of 1.79 lm/W, and correlated color temperature (CCT) of 4874 K. When this phosphor was combined with a 460 nm chip, cold white light with Ra = 70, LE = 13.57 lm/W, and CCT = 5782 K can be achieved. Finally, according to the properties of the phosphor, a conceptual diagram of a new type parallel device was designed, which can easily and effectively realize the conversion of cold and warm white light. This work provides a new idea for the design of single-substrate white light phosphor and proposes a new parallel device concept, which is expected to be applied in the field of lighting.

Systematic Study on the Luminescent Properties, Thermal Stability, and Magnetic Behavior of GdOF: RE3+ (RE = Eu, Yb, and Er) Red Phosphors with Various Morphologies.

In this work, GdOF:RE3+ (RE = Eu, Yb, and Er) phosphors with high thermally stable luminescence were reported, which were synthesized by an ionic liquid-assisted two-phase system and subsequent calcination technique for the first time. Nanodisks, nanorod aggregates, nanoneedles, and stubby nanorods were obtained by simply regulating the pH value. The luminescent properties of precursors and products were discussed in detail. By carefully adjusting the calcination temperature and the pH value of the initial system, pure red emission was achieved in both GdOF:Eu3+ and GdOF:Yb3+, Er3+ phosphors. The reason for distinct luminescent properties of different products was discussed from various perspectives. Moreover, the temperature-dependent spectra were measured and the GdOF:Eu3+ and GdOF:Yb3+, Er3+ products both exhibited outstanding thermal stability. In addition, the as-prepared nanomaterials presented paramagnetic properties, indicating their potential application in both field-emission displays and magnetic resonance imaging technology.

High Incidence of Psychiatric Disorders Associated with Cycloserine Treatment of Multidrug-Resistant Tuberculosis Patients: A Cohort Study in Beijing, China.

Objective: Cycloserine (CS) is a group B anti-tuberculosis (TB) drug endorsed by the World Health Organization (WHO) for the treatment of drug-resistant (DR)-TB. Despite CS widespread acceptance and known efficacy, the high potential of drug-associated psychiatric disorders is a major concern to multidrug-resistant (MDR)-TB patients. In this study, we investigated CS-associated psychiatric disorders in a cohort of MDR-TB patients in Beijing, China. Our aim was to determine psychiatric disorder prevalence rates and associated risk factors in this population. Methods: This MDR-TB cohort study was conducted at Beijing Chest Hospital between February 2018 and February 2021. All patients received individualized treatment regimens that included CS at some point during the full treatment course. Patient psychological status was assessed using the Symptom Checklist (SCL-90) questionnaire during the post-treatment follow-up period. Results: Two hundred and thirty-seven MDR-TB patients were included in the final analysis. Overall, psychiatric disorders were recorded in 22 (9.28%) of the 237 patients in our cohort, with severity grades of 1 or 2 observed for the majority (8.44%) of psychiatric adverse events. As compared to results obtained for control group patients who were ≥40 years of age, patients who were <40 years of age (77.3%, 17/22) were more likely to experience psychiatric disorders [adjusted odds ratio (aOR) = 3.060; 95% CI (1.060-8.828)]. Additionally, patients with body mass index (BMI)s of <18.5 kg/m2 [aOR = 3.824; 95% CI (1.502-9.739)] had significantly higher odds of being afflicted with psychiatric disorders as compared with patients with BMIs that were ≥18.5 kg/m2. Conclusion: Our results demonstrated that approximately one-tenth of Chinese MDR-TB patients experienced psychiatric disorders during CS treatment, with the majority of adverse events of moderate severity. In addition, low BMI and age <40 years were identified as independent risk factors for psychiatric disorders in MDR-TB patients receiving CS therapy.

Chemiresistive gas sensors based on electrospun semiconductor metal oxides: A review.

Semiconductor metal oxide (SMO) gas sensors have attracted considerable attention for detecting environmental pollution, as well as the accidental leakage of flammable, explosive, and toxic gases. SMOs are known to exhibit high sensitivity, fast response time, and excellent selectivity towards various types of gases. Many new strategies have been implemented to improve these characteristics. Among the materials produced by these methods, nanomaterials (NMs) synthesized by electrospinning have unprecedented advantages, including catalyst introduction, morphological control, thermodynamic stability, unique physicochemical properties, composition adjustment, and rapid adsorption-desorption rates of the NMs, and are appealing for the designing highly sensitive and selective gas sensors. This review highlights the latest findings on the design and fabrication of electrospun gas sensors for detecting various gases including hydrogen (H2), methane (CH4), nitrogen monoxide (NO), hydrogen sulfide (H2S), ammonia (NH3), ethanol (C2H5OH), acetone (CH3COCH3), formaldehyde (HCHO) and toluene (C6H5CH3). Studies have indicated that NMs with different shapes (e.g., nanotubes, nanowires, nanoflowers, nanosheets, nanorods, nanofilms, and nanofibers) and compositions (single-phase SMOs, modified SMOs, nanocomposites of SMOs, and SMOs combined with carbon nanomaterials) display high response values, long-term stability, low humidity dependence, fast response/recovery times, and low detection limits for gases. Finally, conclusions and future perspectives for gas sensors based on the electrospinning technique are discussed.

Constructing an S-scheme CuBi2O4/Bi4O5I2 heterojunction for lightemittingdiode-driven pollutant degradation and bacterial inactivation.

The CuBi2O4/Bi4O5I2 S-scheme heterojunction structure was constructed by a hydrothermal and subsequent calcination route. The combination of CuBi2O4 and Bi4O5I2 produced excellent photocatalytic performance under an LED light. A series of technical characterizations, including X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), were used to determine the successful construction of S-scheme CuBi2O4/Bi4O5I2 composites. The improvement of photogenerated carrier separation efficiency helped to achieve the best photocatalytic performance of 37% CuBi2O4/Bi4O5I2, which can degrade tetracycline (TC) to 81.67% in 90 min, and completely inactivate Escherichia coli (E. coli) in 20 min and Staphylococcus aureus (S. aureus) in 40 min. The effects of some key parameters (such as the concentration of pollutants, the amount of catalyst, pH value of a solution, various inorganic anions and various water substrates) and the possible degradation path of tetracycline were systematically studied. Finally, the removal of pollutants and inactivation of bacterial mechanisms based on the S-scheme heterojunction (CuBi2O4/Bi4O5I2) was proposed. This study provides insight into the synthesis of S-scheme heterojunction photocatalysts, which can efficiently degrade organic pollutants and inactivate bacteria under LED light irradiation.